|
Q:
|
INYO, Best pre-manufactured enclosures for LARGE snakes?
|
|
IYO (in your opinions), what are the best pre-manufactured enclosures for large, heavy bodied snakes... saaaaay 7+ ft in length, that leaves room to grow a bit?
We had considered building a custom enclosure, but with as much as I've been working, it'll take months for my husband and I to complete one. I was hoping I could find a nice, SECURE, and comfy enclosure for a decent price.
Did I mention SECURE? (Not that this snake in particular is much of a threat, her temperament is incredible and she's quite the cuddle bug,...just not who I want to wake up next to in the mornings, is all.)
|
|
Assisted Answer
|
1/23/2012 1:49:25 PM
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:04:01 PM
|
|
BabyyItsLove
|
|
Im checking them out right now... scoping out the 6322D, probably going to opt for the undercage heating.... but still scoping out the other options as well. Would a 6ft L x 2ft D even be sufficient for her?
|
|
|
|
|
|
|
|
Assisted Answer
|
1/23/2012 2:08:43 PM
|
|
Miss Andrea
|
|
Is this for your boa? I personally like their 4 and 6 foot cages for boas. They are great and can even be ordered with locks (woot). RHP is a good way to heat a bigger cage, I don't know how your gradient temps are, but their undertank heat probably won't be able to heat the entire cage.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:14:16 PM
|
|
Tiki108
|
|
Animal Plastics hands down, they make awesome cages!
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:15:17 PM
|
|
BabyyItsLove
|
|
And if I go any bigger, the cost of the enclosure without additional options would exceed the cost of materials to just build it custom.
|
|
|
|
|
|
|
|
Assisted Answer
|
1/23/2012 2:17:08 PM
|
|
KCB Constrictors
|
|
I second boaphile plastics. Great, great products. I have 2 stacks of their cages, and 4 of their racks. No worries about security. Their cages come with very strong latches, and are quite escape-proof.
You tagged Burmese Python in the question, and you're refering to the occupant of this potential cage as a "her" so I'm infering that you're shopping for a cage for a female burm. Honestly, a 6x2 isn't going to house her for long if she's already 7 feet long.
If you're considering the 6322D, then I would recommend the 8421D. For the same money you lose 6 inches of head room, but you gain 4 sq ft. of floor space...which will be enough to house your burm into adulthood.
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:23:09 PM
|
|
BabyyItsLove
|
|
Shes a 7ft burm... so she'd need room to grow. What shes in now... well, is less than adequate. We're picking her up on friday, and have decided that she's going to be the only one who gets to reside in our room, mainly for the safety of the tegus who free roam the reptile room at will. I'd hate to spend this much money on a cage that is going to be outgrown, and although my boa can use it, he's still just a little guy in a 20 gal.
She's only 7ft at roughly about 4 years old. Any ideas? Are the 6 footer enclosures ok? How big should I go?
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:24:39 PM
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:26:43 PM
|
|
Miss Andrea
|
|
One downside to boaphiles- they take a while to get. 6 weeks then shipping. I would wait to get her if you don't have the right cage.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:29:24 PM
|
|
Patrick
|
|
Animal Plastics all day! Love AP. Boaphiles to thin of plastic for my liking
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:29:47 PM
|
|
BabyyItsLove
|
|
Now if the 8421D will be ok, what options are in her best interest? Like Andrea was mentioning, undertank heating may not be sufficient as our bedroom just so happen to be the coldest room in the house. We're talking (for the last two months atleast) 62-68 degrees at night... maybe 71 during the day. Our house heater is having a spaz attack and rarely works when needed. Our kids have electric space heaters in their rooms, if we put one in our room, i throws a breaker. I would need to best possible options to keep her temperatures as close to perfect as possible.
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:36:28 PM
|
|
BabyyItsLove
|
|
She's coming with the enclosure that she's in...so worst case scenario, I'd just have to take a few extra days off of work to help build a custom enclosure. Either way, if I leave her for now, she stays in that enclosure. If I take her now, she'll be in that same enclosure until we get one built or ordered. The 8421D looks quite appealing.... i'll have to consider all neccessary options and get a grand total... then consult with them to see what kind of time frame i'm looking at. If we construct an enclosure, it will most likely end up going to our boa when he gets older. So the fact that it's fully functional is a must. I may end up going both ways and constructing a custom enclosure while our pre-manufactured is being prepared and shipped. Oi...this is going to be a long few months,...but entirely worth it for this girl. She deserves it.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:38:30 PM
|
|
Paul White
|
|
What's the budget? Sentec is totally bad-ass but EXPENSIVE. barring them, the 6 or 8' animal plastics would be my choice. Boamasters melamine cages aren't bad, but are heavy as sin and the doors can be funky (see what I did on my blog post Latches on a big snake cage--it helped).
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:44:07 PM
|
|
Tiki108
|
|
Can you get flexwatt and a thermostat? The area where I keep my snakes sometimes gets cooler, around high 60s low 70s, but I have a temp gun and my AP racks that have flexwatt all are staying at the temps I told them to.
Someone correct me if I'm wrong, but don't boaphile only go 2 ft deep? I was told that's too small for burms they do better if it's wider.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 2:50:38 PM
|
|
Paul White
|
|
yeah, boaphiles aren't deep enough IMO--2' is NOT good for a snake that's 10' long.
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 2:58:26 PM
|
|
BabyyItsLove
|
|
I see that all boaphiles are 24 inches deep.
i may end up having to construct a reliable heat source. Play around a bit until we find the right range.
I'm looking at roughly $500-$600 at most. For a FOREVER enclosure. (this is NOT including what I'm going to spend on a temp enclosure in the meantime)
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 3:07:03 PM
|
|
Paul White
|
|
My advice would be a big radiant heat panel for heat. I think they beat the hell out of flexwatt, even though they are kind of pricey.
You're not going to get a big enough cage for 600 (shipped). Boamasters 8x3 is 400 bucks for the melamine version but they are HEAVY and shipping would be a couple hundred bucks most likely. The Animal Plastics t65 is 8x2.5, 525 before shipping but the shipping should b eless (it's made of PVC, so it's lighter and easier and cheaper to ship). Shipping can be pricey--it was 400 bucks to ship my boamaster 8x4s (I had two of them).
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 3:16:43 PM
|
|
BabyyItsLove
|
|
holy gawd.
So what would my ideal dimensions be if we stuck with custom? I know it'd be great to just toss her in her own bedroom and let her kick it in there... but realistically, are we looking for 6, 7 or 8 foot in length? 3 foot in depth? I think I'll go with 3 foot in height.... the other two dimensions are what i'm trying to figure out.
|
|
|
|
|
|
|
|
Accepted Answer
|
1/23/2012 3:26:52 PM
|
|
Paul White
|
|
Well, I wish I knew how the burm had been cared for before you got it--7' is TINY but she could easily catch up. Like if she'd been underfed and you feed her right she may grow a lot more than you expect. I'd say that most female burms I see are 13-16' and fairly girthy. I'd go with at least a 30" deep. 3' high is actually higher than you need and may cause problems with heating the cage. I'd look at 2' tall.
You can look at my blog post Appropriate Caging for Big Snakes if you want. The trick is we just don't know how much she'll grow. She may stay small--I've seen a few well cared for female burms that only hit 10'. I've seen them hit 20' too though.
total cost shipped for my 8x4's was like 1500-1600 bucks for the two of them...big cagine is expensive. I suck at building though.
|
|
|
|
|
|
|
|
Assisted Answer
|
1/23/2012 3:27:59 PM
|
|
KCB Constrictors
|
|
2 feet of depth is perfectly fine for a snake that's 10 feet long. Especially if the cage is 4 to 6 feet in length. A 1 sq ft per foot of body length is a tried and true scale for keeping heavy bodied snakes.
I have 4 foot boaphile plastics cages for my female boas, and they live quite comfortably in them. The 6 and 8 foot cages are for the giant serpents....berms, retics, anacondas...
To answer the follow up question, Lindsey & Anthoney - If you go with the 8421D from Boaphile, I would go with the 2x Heat Tape, Tripple Hindge, Tripple Latch, and Radiant Heat Panel options. The extra latches and hinges at the door centers eliminate the slight possibility of a strong snake pushing on the acrylic doors and bowing them out enough to squeeze out. The heat tape provides a belly heat basking spot on one side, and the radiant heat panel maintains proper ambient temp in the cage (you'll need thermostats for both the tape and the RHP)
If you want further convincing, call Boaphile Plastics. Jeff Ronne (The Bohaphile, himself) will answer the phone and will be happy to talk to you at length about your caging needs.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 3:35:37 PM
|
|
Paul White
|
|
The thing is it may not stay 10' long...it's a Burmese, about 4 years and only 7' but who knows what sort of feeding it's gotten? If she gets it now and feeds it well and it grows to 14', 2' deep is NOT OK.
I'd disagree about 2' for a heavy bodied 10' snake too--but so long as the cage is decently long it's at leat liveable, it's not awful.
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 3:44:19 PM
|
|
BabyyItsLove
|
|
7ft is quite small...when we learned her age, we knew the size didn't match. She's fairly chubby, but not what I would've expected for her age. He took great care of her, she's in good condition with a great attitude. He loves her,... so surely he wasn't intending on neglecting her by any means. She's currently feeding on jumbo rats, 4 to 5 times a month. She's at the inbetween stage where she doesn't appear to be quite able to take a whole rabbit,... maybe if she chose a smaller one...but we'd have to shop by size. There WAS a point in time two months ago when our town ran out of feeders. Not only did this burm go 4 weeks without eating, But ours went three weeks without until we finally drove an hour and a half to the nearest big city to find some. He fed her three jumbo rats in two days until her feeding response slowed. Would that instance effect her feeding schedule at this point? We haven't noticed changes in our snakes from the feeder drought, but again, she is a whole new species for us.
|
|
|
|
|
|
|
|
Author Comment
|
1/23/2012 3:46:31 PM
|
|
BabyyItsLove
|
|
I'm going to close this out, I appreciate all of the information presented here! This definitely gives me a place to start. (i noticed that i rambled on and brought another questions into the mix. I'll take my last questions and make it another for answers.) =0)
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 4:00:16 PM
|
|
KCB Constrictors
|
|
Well, there are two schools of thought on this topic, Paul, and we clearly don't share the same opinion. Your "kill them with kindness" approach with overly spacious enclosures seems like a nice idea, but when you observe these animals in their natural habitat you see that they seek out confined spaces. They cram themselves into hollowed logs, under tree stumps, rocks, and boulders....the tightest spaces they can find.
If over doing it on the caging makes you feel better as a keeper, then go for it. But realize that it's for you, and doesn't provide any added benefit for the animal. It just takes up more space than is nessissary.
The 8x2 Boaphile cage would comfortably house all but the very largest of snakes.
|
|
|
|
|
|
|
|
Member Comment
|
1/23/2012 4:34:14 PM
|
|
Paul White
|
|
KCB: I've always held the opinion they should be able to at least have a natural coil (i.e should be able to coil without being compressed). And I spend plenty of time in the field although of course Texas doesn't have burms or retics.
As far as overkill: I don't know. 8x4s for a 16' snake doesn't seem like overkill. I've got 15' snakes in that size right now and they certainly use all the space (as well as the hides). But as it comes, I'd rather have a 5x30" cage than a 6x2' cage for a big snake (about the same square footage).
|
|
|
|
|
|
You are not logged in. If you would like to participate (it's free!), you must log
in, or Become a Member!
|
|
|
|
Most Popular Tags
Ball
,
Ballpython
,
Bci
,
Behavior
,
Boa
,
Breeding
,
Buying
,
Caging
,
Care
,
Chondro
,
Cornsnake
,
Crested
,
Crestedgecko
,
Eggs
,
Feeders
,
Feeding
,
Feedingproblems
,
Gecko
,
General
,
Genetics
,
GTP
,
Health
,
Heating
,
Humidity
,
Identification
,
Illness
,
Incubation
,
Infection
,
Leopardgecko
,
Mites
,
Morelia
,
Morph
,
Morphs
,
Parasites
,
Python
,
Regius
,
Respiratory
,
Shedding
,
Snake
,
Substrate
|
Latest Questions
|
|
|
|
points:150
|
|
|
|
points:100
|
|
|
|
points:250
|
|
|
|
points:100
|
|
|
|
points:250
|
More Questions
|
|
|
Latest Answers
|
|
|
|
points:250
|
|
|
|
points:150
|
|
|
|
points:100
|
More Answers
|
|
|